- Posted by Anitox
Feed Mill Efficiency Benchmarking: Are You Measuring What Matters?
Producing more feed per hour does not necessarily mean producing it more efficiently.
For commercial compound-feed mills, higher throughput can reduce manufacturing costs when equipment and operating conditions support it. But if additional production comes with higher energy consumption, increased process loss, excessive fines or more rework, the economic benefit may disappear.
Effective feed mill efficiency benchmarking requires looking beyond production speed to understand what each ton of saleable feed actually costs.
Get Your Free Guide to Pellet Quality
Five KPIs that reveal true feed mill efficiency
1. Throughput: How much feed are you actually producing?
Tons per hour is a useful measure of production capacity, but only when the denominator reflects actual operating time.
Benchmarking should distinguish scheduled hours from productive running hours and account for formulation changes, pellet specifications, changeovers and equipment interruptions.
A mill producing fewer tons per hour of a demanding pelleted formulation may be operating more effectively than one producing higher volumes of a simpler product.
The important question is whether throughput improvements translate into more saleable feed without compromising quality or increasing other costs.
2. Energy efficiency: What does each ton cost to process?
Electricity consumption per ton provides a clearer picture of processing efficiency than total energy use alone.
Grinding and pelleting are important energy consumers, but their requirements vary with particle size, formulation, die configuration and conditioning conditions.
In controlled pelleting research, Gilpin et al. (2002) demonstrated that mash moisture, conditioner retention time and steam quality interact to influence pellet durability and electrical energy consumption.
Rather than evaluating kWh per ton independently, mills should examine energy use alongside throughput, feed specifications and physical pellet quality.
3. Process loss: How much purchased material becomes saleable feed?
Differences between ingredient input and finished-feed output can represent a significant economic cost.
Process loss may include moisture evaporation, dust, spillage and material retained within processing equipment. However, changes in inventory moisture can also distort comparisons if input and output weights are not measured consistently.
Moisture management is particularly important because water influences both manufacturing yield and pellet formation.
Research by Thomas and van der Poel (2020) emphasizes that moisture distribution and heat transfer behave differently during conditioning, affecting subsequent pellet formation.
Understanding these relationships is essential when evaluating moisture management in feed milling.
4. Feed quality: Are you producing feed that meets specification?
A ton of finished feed is not necessarily a ton of acceptable feed.
Pellet durability index (PDI), fines percentage and rework rates help determine whether production meets customer requirements.
In controlled feed-manufacturing research, pelleting trials using different die configurations and conditioning temperatures found that increasing die length-to-diameter ratio improved pellet durability but also increased pellet-mill energy consumption.
These findings reinforce why pellet quality and manufacturing efficiency must be considered together.
Mills should evaluate quality at meaningful points, including discharge, storage and loading, rather than relying exclusively on results immediately after pelleting.
5. Operational reliability: How much productive capacity is lost?
Unplanned downtime reduces available production capacity while labor, overhead and other fixed costs continue.
Equipment availability, interruption frequency, downtime duration and maintenance-related production losses help identify where capacity is being lost.
Benchmarking should distinguish scheduled maintenance from unplanned stops and quantify the tons of production affected. Otherwise, a high instantaneous throughput rate may conceal poor overall equipment utilization.
Why feed mill benchmarks require context
No single throughput, energy or PDI target is appropriate for every compound-feed mill.
Formulation, ingredient characteristics, equipment configuration, die specifications, conditioning conditions and product mix all influence performance.
Even controlled research demonstrates these interactions. Iravani et al. (2024) reviewed how conditioning temperature and retention time affect pellet quality and broiler performance, highlighting the need to interpret processing conditions together rather than in isolation.
Comparisons are most meaningful between equivalent products, equipment configurations and operating conditions.
Understanding the tradeoffs
Improving one KPI can affect several others.
Increasing production rate may reduce conditioning time or alter pellet quality. More restrictive die configurations may improve durability while increasing energy demand. Moisture adjustments may improve pellet formation, but excessive moisture can create handling, storage or stability problems.
These interactions mean a higher tons-per-hour figure cannot independently establish an efficiency gain.
The more useful measure is total manufacturing cost per saleable ton, supported by consistent monitoring of production output, energy, process loss, quality and downtime.
Benchmark the outcome, not just the process
Feed mill efficiency benchmarking should start with a validated plant baseline, comparable production runs and reliable measurements.
Improvements should then be evaluated against the actual quantity and quality of feed delivered, together with the resources required to produce it.
Efficient mills do not simply produce feed faster. They optimize the cost and quality of every saleable ton.
Are you measuring the right indicators of feed mill efficiency? Contact your Anitox Feed Expert to explore opportunities to reduce process loss, improve feed quality and optimize cost per saleable ton.
